When we first viewed our property (fifteen years ago), we were impressed with the pond and the rather large goldfish inhabitants. Michael landscaped the area with rocks and plants and created a smaller top pond, adding a cascade for completion. It is a lovely, peaceful setting to gaze upon from the kitchen window

but Michael has lamented the ever present algae due, in part, to the lack of water depth and more recently the obvious presence of a leak in the liner.

Deciding on a pre-formed pond rather than replacing the liner, we set about the project we had been procrastinating on for months. The first job was to create easy access by relocating the pot pond and trimming plants.

The pond plants and surrounding rocks were removed to expose the liner

before I donned the appropriate outfit to bucket out the water which Michael diligently distributed around the garden (we were having a very dry summer).

We pulled the old liner out (which did, indeed, have an obvious split)

and tried the new pond for size.

Hoping to not encounter tree roots, the digging commenced.

With periodic fittings, and no underground impediments, the site was ready.

With a trailer load of sand on standby, the base was prepared

and the pond lined with plastic to protect it from the river stones.

Once levelled,

the task of packing the sand around the outside began. Between us, we came up with an ingenious plan to convey the sand into the tight spaces – a funnel made from a chook feed bag and a ring of builders strapping.

It worked brilliantly.

We had been advised to pack some sand, then fill some water and repeat in stages to avoid distortion of the pond shell.

The river stones from the old pond had been saved and I spent some time sorting them

while Michael repotted the plants.

The fish were returned to their new home, along with the plants

and a new cascade perfected the picture.

We then set about filling in the top pond,

and after some further landscaping,

declared the project finished.